High‐Entropy Alloy (HEA)‐Coated Nanolattice Structures and Their Mechanical Properties

Nanolattice structure fabricated by two‐photon lithography (TPL) is a coupling of size‐dependent mechanical properties at micro/nano‐scale with structural geometry responses in wide applications of scalable micro/nano‐manufacturing. In this work, three‐dimensional (3D) polymeric nanolattices are initially fabricated using TPL, then conformably coated with an 80 nm thick high‐entropy alloy (HEA) thin film (CoCrFeNiAl_0.3) via physical vapor deposition (PVD). 3D atomic‐probe tomography (APT) reveals the homogeneous element distribution in the synthesized HEA film deposited on the substrate. Mechanical properties of the obtained composite architectures are investigated via in situ scanning electron microscope (SEM) compression test, as well as finite element method (FEM) at the relevant length scales. The presented HEA‐coated nanolattice encouragingly not only exhibits superior compressive specific strength of ≈0.032 MPa kg^?1 m³ with density well below 1000 kg m^?3, but also shows good compression ductility due to its composite nature. This concept of combining HEA with polymer lattice structures demonstrates the potential of fabricating novel architected metamaterials with tunable mechanical properties.

     

A Two‐Stage Annealing Strategy for Crystallization Control of CH3NH3PbI3 Films toward Highly Reproducible Perovskite Solar Cells

The solvent‐engineering method is widely used to fabricate top‐performing perovskite solar cells, which, however, usually exhibit inferior reproducibility. Herein, a two‐stage annealing (TSA) strategy is demonstrated for processing of perovskite films, namely, annealing the intermediate phase at 60 °C for the first stage then at 100 °C for the second stage. Compared to conventional direct annealing temperature (DHA) at 100 °C, using this strategy, MAPbI₃ films become more controllable, leading to superior film uniformity and device reproducibility with the champion device efficiency reaching 19.8%. More specifically, the coefficient of variation of efficiency for 49 cells is reduced to 5.9%, compared to 9.8% for that using DHA. The TSA process is carefully studied using Fourier transform infrared spectroscopy, X‐ray diffraction, and UV–vis absorption spectroscopy. It is found that in comparison with DHA the formation of hydrogen bonding and crystallization of perovskite are much slower and can be better controlled when using TSA. The improvements in film uniformity and device reproducibility are attributed to: 1) controllable MAPbI₃ crystal growth stemming from the progressive formation of hydrogen bonding between methylammonium and halide; 2) suppression of intermediate phase film dewetting, which is believed to be due to its decreased mobility at the initial low‐temperature annealing stage.     

CO2分压对20#钢在CO2/H2O气液两相塞状流中腐蚀行为的影响

利用失重法、SEM、EDS、XRD和XPS等分析方法在自主设计的动态腐蚀实验装置上研究了CO_2分压对20#钢在CO_2/H_2O气液两相塞状流中腐蚀行为的影响,对腐蚀试样进行了腐蚀速率分析、腐蚀形貌特征观察以及腐蚀产物成分与膜层结构特征分析。结果表明:随CO_2分压的增加腐蚀速率增加,0.04 MPa、0.28 MPa下分别达到腐蚀速率最小值(1.160 9 mm/a)和最大值(1.898 8mm/a);上管壁腐蚀产物随着CO_2分压的增加最终形成颗粒较大的节瘤状产物,下管壁腐蚀产物由球形颗粒形成初始致密的单层膜逐渐转变为由致密的内层膜和具有网状连通裂纹的片状疏松外层膜构成;经EDS元素分析可知上下壁面的腐蚀产物均由Fe、C、O三种元素构成,XPS分峰图谱显示C 1s、O 1s和Fe 2p均出现了三个拟合峰位,结合XRD分析可知腐蚀产物的主要组成相有Fe_3C、FeCO_3、Fe_2O_3、Fe_3O_4、FeOOH。     

基于离散元方法的RDX-Al颗粒混合数值模拟分析

基于离散元方法,以旋转筒内RDX-Al二元颗粒体系的搅拌过程为研究对象进行模拟。采用离散元软件(EDEM),首先研究RDX-Al二元颗粒各自随转速的变化趋势,并进一步得出二元颗粒变化率的特点,做出分布上的拟合,得出最吻合模拟试验的函数为指数函数。然后,将旋转筒细分为多个单元空间,考察旋转轴与单元空间之间的距离对二元颗粒混合效果的影响。结果表明:单元空间离旋转轴越远,即旋转半径越大,颗粒之间的变化率也就越快,越容易达到均匀状态。最后,考察加入抄板的影响,结果表明:RDX-Al二元颗粒趋于的稳定值分别发生了改变。     

淡一次风扩口角度对径向浓淡旋流煤粉燃烧器出口流场影响的试验研究

在气固两相试验台上采用先进的PDA测试系统对不同淡一次风扩口角度情况下径向浓淡旋流燃烧器出口气相速度、湍动能、颗粒粒径、颗粒浓度分布进行了测量,并分析了淡一次风扩口角度对燃烧器性能的影响,为工程应用和优化设计提供了参考性依据。